Setting up the
Sphere system
Follow the procedures in this section to set up the Sphere System to work with
UM8500.
NOTE
Verify that the User Agent Generic-SIP-Trunk, your Voice
Mail SIP user agent, appears in the SIP tab in the
Sphericall System Properties. If it is missing, add the user
agent and restart the UM8500 system in order to be
recognized by the Sphere system.
To configure the Sphere system and add voicemail ports.
NOTE
The Sphere System Installation discs are not shipped with
UM8500. If you do not have the installation discs, contact
the NEC reseller. Follow NEC Sphere procedures for initial
installation and configuration of the Sphere system.
1
Open the Sphericall Administrator:
Start > All Programs > Sphericall > Administrator
Click
■
or
Double-click the
■
General
2
Click the
tab.
System - NEC - NOT for resale
3
Double click
Properties window.
The System Properties window appears
4
On the System Properties window, click the
Sphericall Administrator
SIP
S
S
PHERE
.
icon on the desktop.
to open the System
tab.
307
YSTEM