Integration
overview
UNIVERGE UM8500 I
236
Use this section of the Integration Guide with the Installation Guide.
Integration steps
Follow these steps to set up this integration.
Review the system and equipment requirements.
1
Verify that all phone system and messaging system server requirements have
been met. See "Requirements," below.
Configure UNIVERGE UM8500 for the integration.
2
See
"Configuring UNIVERGE UM8500 for the
Program the phone system and extensions.
3
See
"Programming the phone
Requirements
The steps to set up the NEC UNIVERGE USV8500 direct digital integration require
the following:
Phone system
NEC UNIVERGE SV8500, revision S01 or later, installed and ready for the
●
integration as described in the phone system documentation.
One or more of the following digital line cards set up as voice messaging ports
●
connected to the voice boards in the messaging system server:
Card name
16ELCH (with SP-3125)
16ELCJ
16ELCJ-B
16ELCJB-A
16ELCNA
CAUTION
Use only the black and yellow pair of wires. The RJ-14
connectors on the Dialogic D42-NE2 voice board use only
a single pair of wires.
UNIVERGE UM8500 server
The Dialogic digital voice boards installed; see the Installation Guide for
●
installation details.
NOTE
For the latest information on supported voice boards for UM8500,
contact a sale representative.
UM8500 installed and ready for the integration as described in the
●
Installation Guide.
A system key that enables the integration and the appropriate number of
●
voice messaging ports.
G
NTEGRATION
UIDE
integration"
system"
on page
239.
Description
Digital line card, 16 ports
Digital line card, 16 ports
Digital line card, 16 ports
Digital line card, 16 ports
Digital line card, 16 ports
on page
238.