Table of Contents
Advertisement
Integration
overview
UNIVERGE UM8500 I
198
UNIVERGE UM8500 uses the Open Application Interface (OAI) to integrate with
NEC PBX systems using a TCP/IP link between the UNIVERGE UM8500 server and
the PBX. OAI Integration can be used with digital, analog, T1, or IP lines and
requires that the OAI Integration server is installed.
Integration steps
Follow these steps to set up this integration.
Review the system and equipment requirements
1
Verify that all phone system and messaging system server requirements have
been met. See "Requirements"
Program the phone system and extensions.
2
See
"Programming the phone
Configure UNIVERGE UM8500 for the integration.
3
See
"Configuring UNIVERGE UM8500 for the
Install the OAI Integration Server software.
4
See
"Installing the OAI Integration Server
Configure the OAI Integration Server.
5
See
"Configuring the OAI Integration
Install and start the OAI service.
6
See
"Installing and starting the OAI
G
NTEGRATION
UIDE
on page
199.
system"
on page
201.
integration"
software"
on page
Server"
on page
207.
service"
on page
210.
on page
204.
206.
Advertisement
Chapters
Table of Contents
Troubleshooting
