Configuring Univerge Um8500 For The Integration - NEC UNIVERGE UM8500 Integration Manual

Configuring
UNIVERGE
UM8500 for the
integration
UNIVERGE UM8500 I
102
After ensuring that the UM8500 server is ready for the integration by completing
all appropriate tasks in the Installation Guide, perform the following procedure to
confirm that the integration is enabled.
To configure the UM8500 server for integration
1 Start > All Programs > UNIVERGE UM8500 > Key Dump
Click
Integration
2
Verify the
Start > All Programs > UNIVERGE UM8500 > Edit Switch
3
Click
4
If prompted for logon credentials, type the administrator extension and
OK
password, then click
On a new install the logon credentials are:
Extension = 99995
■
Password = 12345
■
5
Confirm that the settings match those in the following table. If the settings are
incorrect, the integration features may not be enabled.
Phone system setting
Parameter
Manufacturer
Model
Specific Version or Country 5020 IP PHONE EMULATION
Integrations
6
Stop UNIVERGE UM8500 if it is running.
Start > Control Panel > IP Phone Emulation
7
Go to
Networks IP Phone Emulation Settings dialog box appears.
Adapter Settings
8
Click the
switch.
The Selected Network Card field should display the name of the network card;
for example,
Intel(R) Pro/100 Desktop Adapter
Address assigned to the card.
Current IP Address
Leave the
by the DHCP Server. Type the IP address only if the messaging system server
has a static IP address.
Switch 0
9
On the tab, type a
.
SX3300 Switch
10
Type the IP address of the switch in the
The IP Address must belong to the same domain as the network adapter. For
example, if the IP Address of the network adapter connecting to the
messaging system server is
may be
172.10.18.90
11
Right click in the white box with the columns headings
Phone ID
and select
The Insert Phone Entry dialog box appears.
12
Type a voice mail port number in the
Apply
13
Click , then repeat step
To delete a port, right click on the port and select
To edit a port, right click on the port and select
Close
14
Click when you are finished adding the voice mail port numbers.
G
NTEGRATION UIDE
MITELIP Multiple Integrations
setting is or
.
Required settings
MITEL
3300 ICP
IP
tab for the adapter used to connect the Mitel IP
field blank if the IP is assigned automatically
Name
for the Switch. For example, type
IP Address
, the IP Address of the switch
172.20.18100
.
Insert
.
PrimeDN
12 to add all voice mail port numbers.
Edit
.
.
.
. The Mitel
, and the IP
Mitel
field.
Prime DN
and
field.
Delete
.
.