System Subsystem; Default Conditions; Preset; Posetup - Keithley 2500 User Manual

Models 2500 and 2502 User's Manual

SYSTem subsystem

The SYSTem subsystem contains miscellaneous commands that are summarized in
Table

Default conditions

PRESet

:SYSTem:PRESet
Description

POSetup

:SYSTem:POSetup <name>
Parameters
Query
Description
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
17-8.
This command returns the instrument to states optimized for front panel
operation. :SYSTem:PRESet defaults are listed in the SCPI tables
(Table 17-1
<name> =
:POSetup?
This command is used to select the power-on defaults. With RST
selected, the instrument powers up to the *RST default conditions. With
PRES selected, the instrument powers up to the :SYStem:PRESet
default conditions. Default conditions are listed in the SCPI tables
(Table 17-1
With the SAV0-4 parameters specified, the instrument powers-on to the
setup that is saved in the specified location using the *SAV command.
Return to :SYSTem:PRESet defaults
through Table 17-10).
Program power-on defaults
RST Power-up to *RST defaults
PRESet Power-up to :SYSTem:PRESet defaults
SAV0 Power-up to setup stored at memory location 0
SAV1 Power-up to setup stored at memory location 1
SAV2 Power-up to setup stored at memory location 2
SAV3 Power-up to setup stored at memory location 3
SAV4 Power-up to setup stored at memory location 4
Query power-on setup
through Table 17-10).
SCPI Command Reference 17-81