Figure 10-8 Configure Trigger Menu Tree - Keithley 2500 User Manual

10-16 Triggering
• HALT — Use to return the Model 2500 to the idle state. HALT does not turn off the
output. The programmed source level will still be available at the OUTPUT terminals.
The following actions will take the Model 2500 out of idle:
– Turn the output off and then on again.
– Reselect the arm or trigger event.
– Exit from the menu structure, and then reenter it by pressing CONFIG and then
Figure 10-8
Configure trigger menu tree
Arm In
Line
Immediate
GPIB
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
TRIG.
Arm
Layer
Arm
Count
Out
Events Immediate
Timer Manual TLINK
Models 2500 and 2502 User's Manual
Config
Trig
Trig
Layer
Trigger Trigger
In Out
Trigger
Line
Link
STEST STEST STEST
Halt
Delay Count
Events