Configure Mars To Receive The Solaris Or Linux Host Logs - Cisco CS-MARS-20-K9 - Security MARS 20 User Manual

Chapter 10 Configuring Generic, Solaris, Linux, and Windows Application Hosts
Once this line is added to the syslog.conf file and you have restarted syslogd, any messages sent to
console are also sent to the MARS Appliance.

Configure MARS to Receive the Solaris or Linux Host Logs

To add a Solaris or Linux device to MARS, follow these steps:
Click Admin > Security and Monitor Devices > Add.
Step 1
Figure 10-1
From the Device Type list, select Add SW Security apps on a new host.
Step 2
78-17020-01
/etc/init.d/syslog start
Adding a Solaris or Linux Device
User Guide for Cisco Security MARS Local Controller
Sun Solaris and Linux Hosts
10-3