Creating A Static Arp Entry; Removing Arp Entries - HP 1920 Series User Manual

Creating a static ARP entry

1.
2.
3.
4.
Table 80 Configuration items

Removing ARP entries

1.
2.
Downloaded from www.Manualslib.com
From the navigation tree, select Network > ARP Management.
The default ARP Table page appears, as shown in
Click Add.
The New Static ARP Entry page appears.
Figure 219 Add a static ARP entry
Configure the static ARP entry as described in
Click Apply.
Item Description
IP Address Enter an IP address for the static ARP entry.
MAC Address Enter a MAC address for the static ARP entry.
VLAN ID Enter a VLAN ID and specify a port for the static ARP entry.
Advanced
Options
Port
The VLAN ID must be the ID of the VLAN that has already been created, and the port
must belong to the VLAN. The corresponding VLAN interface must have been created.
From the navigation tree, select Network > ARP Management.
The default ARP Table page appears, as shown in
Remove ARP entries:
To remove specific ARP entries, select the boxes of target ARP entries, and click Del Selected.
To remove all static and dynamic ARP entries, click Delete Static and Dynamic.
To remove all static ARP entries, click Delete Static.
To remove all dynamic ARP entries, click Delete Dynamic.
manuals search engine
Figure
Table
IMPORTANT:
Figure
245
218.
80.
218.