Throttle Body And Intake Manifold Components - Suzuki Grand Vitara 2011 Manual

5) Connect PCV hose (2) to PCV valve (3).
6) Connect breather hose (4).
7) Install oil level gauge (1).

Throttle Body and Intake Manifold Components

[A]: Installing location of intake manifold bolt and nut
1. Intake manifold
2. Gasket
3. Electrical throttle body
4. EGR pipe
5. MAP sensor
6. PCV hose
Engine Mechanical: For M16A Engine with VVT 1D-11
8) Install wire harness clamp to cylinder head cover.
9) Install ignition coil assemblies with high-tension cord.
10) Connect ignition coil couplers and clamp harness
securely.
11) Install cylinder head upper cover.
12) Connect negative cable at battery.
I5JB0A141007-01
7. EVAP canister purge valve
8. EVAP canister purge valve hose
9. MAP sensor bolt
10. To EGR valve
11. To PCV valve
12. To brake booster
13. Intake manifold nut
S6JB0A1416004
I5JB0A141005-05
14. Intake manifold bolt (short)
15. Intake manifold bolt (long)
16. To delivery pipe
: 5 N⋅m (0.5 kgf-m, 4.0 lb-ft)
: Do not reuse.