6A1-48 ENGINE MECHANICAL (M13 ENGINE)
Valves and Cylinder Head
1. Valve cotters
2. Valve spring retainer
3. Valve spring
4. Valve stem seal
5. Valve spring seat
6. Intake valve
7. Exhaust valve
8. Valve guide
9. Cylinder head bolt
1) Tighten all bolts at 40 N·m (4.0 kg-m)
2) Turn all bolts to 60°
3) Then, turn all bolts to 60° once again
10. Cylinder head
11. Cylinder head gasket
: "TOP" mark provided on gasket comes to
crankshaft pulley side, facing up.
12. Knock pin
Tightening torque
Do not reuse.
Apply engine oil to sliding surface of each
part.