Valves And Cylinder Head Components - Suzuki 2006 SX4 Service Manual

Hide thumbs Also See for 2006 SX4:

Table of Contents

Valves and Cylinder Head Components

1. Valve cotters

2. Valve spring retainer

3. Valve spring

4. Valve stem seal

5. Valve spring seat

6. Intake valve

7. Exhaust valve

8. Valve guide

9. Cylinder head bolt (M10)

: Check cylinder head bolt (M10), plastic deformation

tightening bolt, for deformation referring to "Valves and

Cylinder Head Removal and Installation", if it is reused.

10. Cylinder head

11. Cylinder head gasket

: "TOP" mark provided on gasket comes to crankshaft

pulley side, facing up.

12. Knock pin

Engine Mechanical:

13. Cylinder head bolt (M8)

: Be sure to tighten cylinder head bolt (M8) after

securing the other cylinder head bolt (M10).

: Tighten 20 N⋅m (2.0 kgf-m, 14.5 lb-ft), 40 N⋅m (4.0 kgf-

m, 29.0 lb-ft), 60° and 60° by the specified procedure.

: Tighten 25 N⋅m (2.5 kgf-m, 18.0 lb-ft) by the specified

: Do not reuse.

: Apply engine oil to sliding surface of each part.

S6RW0D1406025

I4RS0A140015-01

Table of Contents