DRIVER-SIDE AIR BAG MODULE
DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION
WARNING:
Handling the air bag module improperly can accidentally deploy the air bag module, which may
•
seriously injure you. Read the service warnings and cautions before handling the air bag module. (See
SERVICE WARNINGS .) (See SERVICE CAUTIONS .)
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for 1 min or more .
3. Remove in the order indicated in the table.
1 Cover
2 Bolt
Connector
3
(See Connector Removal Note .)
4 Driver-side air bag module
4. Install in the reverse order of removal.
5. Turn the ignition switch to the ON position.
(w)
RX-8 Safety
Page 103