Removal / Installation; Inspection; Front Fog Light Switch; Rear Window Defroster Switch - Mazda 1996 626 Service Manual

SWITCHES

FRONT FOG LIGHT SWITCH

Removal / Installation

1. Remove the switch panel.
(Refer to the 1996 626/MX-6 Workshop Manual, section S.)
2. Disconnect the front fog light switch connector.
3. Remove the front fog light switch.
4. Install in the reverse order of removal.

Inspection

1. Remove the front fog light switch.
2. Check for continuity between the terminals of the front
fog light switch.
'''^ - ^ J T e r m in a l
A
Switch positRsn"-^
Qpp
o ------
— $
o
ON
3. If not as specified, replace the front fog light switch.

REAR WINDOW DEFROSTER SWITCH

Removal / Installation
1. Remove the switch panel.
(Refer to the 1996 626/MX-6 Workshop Manual, section S.)
2. Disconnect the rear window defroster switch connector.
3. Remove the rear window defroster switch.
4. Install in the reverse order of removal.
Inspection
1. Remove the rear window defroster switch.
2. Check for continuity between the terminals of the rear
window defroster switch.
~ ~ ~ ~ — ^Terminal
B
Switch position— ^
OFF
O------
ON
3. If not as specified, replace the rear window defroster
switch.
PANEL LIGHT CONTROL SWITCH
Removal / Installation
1. Remove the switch panel.
(Refer to the 1996 626/MX-6 Workshop Manual, section S.)
2. Disconnect the panel light control switch connector.
3. Remove the panel light control switch.
4. Install in the reverse order of removal.
0 - 0 : Continuity O ® O : Bulb
c
B
%
^ ------ o
o
o
S )— —
-------- O
0
0 - 0 : Continuity — @KD ; Bulb
c
E
----
O ji)___ q
o
— (
Z4
Z
D
F
Z4— 0