Sfp Transceivers (Fibre Optic Connectors); Port Leds; Rear Panel Features; Edge Switch 2/12 (Rear View) - HP StorageWorks Edge Switch 2/12 Installation Manual

Switch Features

SFP Transceivers (Fibre Optic Connectors)

The Edge Switch 2/12 provides 12 Fibre Channel ports. A single-mode or
multi-mode fiber-optic cable attaches to a port through a small form factor
pluggable (SFP) transceiver. The SFP provides a duplex LC interface, and can be
detached from the switch port for easy replacement. The following fiber-optic
transceiver types are available:

Port LEDs

Amber and green/blue LEDs to the left of each Fibre Channel port illuminate,
extinguish, or blink to indicate port status and port speed.

Rear Panel Features

The switch provides a power supply with internal cooling fans.
the rear of the switch.
1
2
Figure 3: Edge Switch 2/12 (rear view)
22
Shortwave laser–Shortwave laser SFPs provide short-distance connections
(2 to 500 meters) through 50-micron or 62.5-micron multi-mode fiber.
Longwave laser–Longwave laser SFPs provide long-distance connections
(up to 10 kilometers) through 9-micron single-mode fiber.
E_Port (Full-Fabric) feature key is required to use the longwave laser.
Amber LED–illuminates if the port fails.
Green/blue LED–illuminates green to indicate 1.0625 Gbps port operation.
Illuminates blue to indicate 2.125 Gbps port operation.
1 2
AC power receptacle
Power supply with internal cooling fans
3
Maintenance port
3
Edge Switch 2/12 Installation Guide
Figure 3 illustrates