Mitsubishi Stealth 1994 Import Service Manual page 784

17-28
TRAILING ARM
REMOVAL AND INSTALLATION
260 300 Nm
Removal steps
1. Rear brake caliper assembly
2. Rear brake disc
3. Drive shaft to companion flange mounting
bolt and nut
4. Self-locking nut
5. Companion flange
6. Rear axle shaft
7. Parking brake cable end
8. Parking brake cable clamp bolt
9. Rear speed sensor (ABS)
cable bands (ABS)
11. Dust shield
12. Self-locking nut (upper arm)
13. Self-locking nut (lower arm)
14. Tie rod end mounting nut
15. Trailing arm mounting bolt and nut
16. Rear shock absorber mounting bolt
17. Trailing arm
NOTE
For tightening pornts marked with *, first temporarily tighten
and then ground the vehicle to torque to specification where the
vehicle is empty.
REAR SUSPENSION <AWD> - Trailing Arm
5 0 - 6 0 N m
36 - 43 ftlbs.
Post-installation Operation
Check of Wheel Alignment
l