Mitsubishi Stealth 1994 Import Service Manual page 1186

SRS
SRS warning light
5. CLOCK SPRING AND SRS DIAGNOSIS UNIT CONNEC-
TION
After securely and correctly installing the clock spring's
connector to the SRS diagnosis unit, be absolutely sure to
press down the lock lever of the SRS diagnosis unit.
4. INSTALLATION OF STEERING WHEEL
(1) Before installing the steering wheel, be sure to first turn
the vehicle's front wheels to the straight-ahead position
and align the mating mark and "NEUTRAL" position
indicator of the clock spring.
Caution
Be sure when installing the steering wheel, that the
harness of the clock spring does not become caught
or tangled.
(2) After clamping, turn the steering wheel all the way in
both directions to confirm that steering is normal.
POST-INSTALLATION INSPECTION
(1) After installing the clock spring, the steering wheel, the
column covers and the air bag module, check steering
wheel for noise, binds or difficult operation.
(2) Reconnect the negative battery terminal. Turn the ignition
switch to "ON". Check if the SRS warning light illuminates
for about 7 seconds and then remain OFF for at least 45
seconds.
If yes, SRS system is functioning properly, if no, consult
page 23B-17.