Mitsubishi Stealth 1994 Import Service Manual page 1224

24-32
HEATERS AND MANUAL AIR CONDITIONING
DISASSEMBLY AND REASSEMBLY
Magnetic clutch disassembly steps
2. Pulley
l
* 4. Armature plate
5. Snap ring
6. Rotor
l
7. Snap ring
*
9. Shims
High pressure relief valve disassembly
(2) If any other air conditioning part is replaced simul-
taneously with the compressor, remove the oil from the
new compressor, taking the specified amount of oil for
the part into consideration.
Quantity
Evaporator: 60 cm3 (2.0 fl.oz.)
Condenser: 15 cm3 (.5 fl.oz.1
Low-pressure hose: 10 cm3 (.3 fl.oz.)
Receiver: 10 cm3 (.3 fl.oz.)
<DOHC>
<SOHC>
Thermostat and revolution pick up sensor disassem-
bly
12. Thermostat and revolution pick up sensor
<DOHC>