Mitsubishi Stealth 1994 Import Service Manual page 1172

SRS
S
Connector
tor case
WHEN AIR BAG DOES NOT DEPLOY IN LOW-SPEED
COLLISION
Check the SRS components.
If the SRS components are showing any visible damage such
as dents, cracks, or deformation, replace them with new ones.
Concerning parts removed for inspection, replacement with
new parts and cautionary points for working, refer to appropri-
ate COMPONENT SERVICE, P.23B-48.
Front Impact Sensors
(2) Check front impact sensor for dents, cracks, deformities or
rust.
(3) Check sensor harnesses for binds, connectors for damage,
and terminals for deformities.
SRS Diagnosis Unit (SDU)
(1) Check SDU case and brackets for dents, cracks or
deformities.
(2) Check connectors and lock lever for damage, and terminals
for deformities.
Air Bag Module
<Driver's seat>
(1) Check pad cover for dents, cracks or deformities.
(2) Check for connectors damage, deformed terminal, and
binding harness.
(3) Check air bag inflator case for dents, cracks or deformities.
(4) Install air bag module to steering wheel to check fit or
alignment with the wheel.