Mitsubishi Stealth 1994 Import Service Manual page 560

MULTIPORT FUEL INJECTION -
INDUCTION CONTROL VALVE POSITION SENSOR <DOHC>
(DC motor)(with built-in induction,/
control valve position sensor)
OPERATION
The induction control valve position sensor detects the induction control valve opening degree and
l
converts it into a pulse signal to be input into the engine control module, which provides valve opening
and closing control based on this signal.
The induction control valve position sensor is supplied with 5 V power from the engine control module and
l
is grounded to the engine control module. A voltage of 5 V from the engine control module is impressed to
the two output terminals of the induction control valve position sensor. By opening and closing the circuit
between the output terminal and ground, the induction control valve position sensor generates the pulse
signal.
On-Vehicle Inspection of MFI Components
Variable induction control motor (DC motor)
connector
Variable induction
control motor
connector
Engine
control
1 7 2