Mitsubishi Stealth 1994 Import Service Manual page 411

INTAKE AND EXHAUST
SERVICE POINTS OF REMOVAL
6. REMOVAL OF FUEL RAIL (WITH INJECTORS)
Disconnect the fuel rail with the injector attached to the fuel
rail.
Caution
1. Be careful not to drop the injector when removing
the fuel rail.
2. Be aware that fuel will flow out when the injector is
removed.
INSPECTION
Check the following points; replace the part if a problem is
found.
INTAKE MANIFOLD
(1) Check for damage or cracking of any part.
(2) Clogging of the negative pressure (vacuum) outlet port, or
clogging of the water or gas passages.
(3) Check deflection of installation surface with straight edge
and thickness gauge.
Standard value: 0.15 mm (.0059 in.) or less
Limit : 0.2 mm (.008 in.)
SERVICE POINTS OF INSTALLATION
14. INSTALLATION OF INTAKE MANIFOLD GASKET
Attach the gasket to the cylinder head, facing the adhesive
coated side toward the intake manifold.
13. INSTALLATION OF INTAKE MANIFOLD
Apply lubricant sparingly to the intake manifold mounting
nuts.