Mitsubishi Stealth 1994 Import Service Manual page 1259

FULL AUTO AIR CONDITIONING
COMPRESSOR, CONDENSER, CONDENSER FAN MOTOR, RE-
NOTE
Torque hose clamps to 4 Nm (2.9 ft.lbs.1.
Air pipe
Alignment marks
Hose end: Paint mar
Pipe end: Protrusion
OTHER PARTS
Service procedures for other parts are the same as those in HEATER AND MANUAL AIR CONDITIONING.
Part name
Heater Unit
Blower Motor Assembly
Evaporator - Removal and Installation
SERVICE POINTS OF INSTALLATION
2. INSTALLATION OF AIR PIPE / 1. AIR HOSE B
When installing the air hoses, make sure that the alignment
marks at places indicated by arrows are properly aligned.
Insert each air hose until it hits the root of step or it
bottoms.
Caution
Charge air
Be careful not to allow any foreign matter to get into
cooler
the hoses, pipes, or the charge air cooler itself.
left
Ref. page
Evaporator ~ Disassembly and Reassembly
Compressor ~ Drsassembly and Reassembly
Ventilators
Compressor, Condenser, Condenser Fan Motor,
The service procedures are the same as those for manual
air conditioning except for those parts described below on
turbocharged vehicles.
Compressor, condenser and condenser fan
motor, refrigerant line removal steps
l +
1. Air hose B
l +
2. Air pipe
Part name
24-67
Ref. page