Mitsubishi Stealth 1994 Import Service Manual page 749

PROPELLER SHAFT AND UNIVERSAL JOINTS
SERVICE POINTS OF REMOVAL
3. REMOVAL OF PROPELLER SHAFT
(1) Make mating marks on the differential companion
flange and flange yoke.
Caution
Remove the propeller shaft in a straight and level
manner so as to ensure that the boot is not
damaged through pinching.
NOTE
Damage to the boot can be avoided, and the work will
be easier, if a piece of cloth or similar material is
inserted in the boot.
(2) Use the special tool provided as a cover to prevent the
entry of foreign objects into the transfer.
4. REMOVAL OF SPACER
The number of spacers necessary may differ from one
location to another (front, rear, right, left). Record the
number of spacers used to ensure correct installation.
INSPECTION
Check the sleeve yoke, center yoke and flange yoke for
l
wear, damage or cracks.
Check the propeller shaft yokes for wear, damage or
l
cracks.
Check the propeller shaft for bends, twisting or damage.
l
Measure the propeller shaft runout with a dial indicator.
l
Limit:
Front propeller shaft
Center propeller shaft
Rear propeller shaft
NOTE
Set the V-blocks as much as possible to the end of the
shaft. Measure deflection at the center of the shaft.
16-5
0.6 mm (.024 in.) or less
0.6 mm (.024 in.) or less
0.6 mm (.024 in.) or less