Mitsubishi Stealth 1994 Import Service Manual page 899

MANUAL TRANSAXLE <AWD>
Air intake
hose C
Air Intake hose A
Air intake hose B
Air hose A
SERVICE POINTS OF REMOVAL
CONNECTION OF TRANSAXLE MOUNT
Refer to P.21-16.
22. DISCONNECTION OF TIE ROD END / 23. LOWER ARM
BALL JOINT
Refer to P.21-17.
27. REMOVAL OF DRIVE SHAFT (LEFT SIDE), INNER SHAFT
ASSEMBLY / 28. DRIVE SHAFT (RIGHT SIDE) / 31.
TRANSAXLE ASSEMBLY LOWER COUPLING BOLT / 32.
TRANSAXLE ASSEMBLY
Refer to P.21-17.
SERVICE POINTS OF INSTALLATION
28. INSTALLATION OF DRIVE SHAFT (RIGHT SIDE) / 18.
MOUNTING STOPPER
Refer to P.21-17.
5. INSTALLATION OF VACUUM PIPE
If the vacuum pipe has a stepped part, connect the vacuum
hose to the pipe securely, up to the stepped part, as shown
in the figure.
4. INSTALLATION OF AIR CLEANER COVER, AIR INTAKE
HOSE A
Align slots indicated by arrows in air intake hose A with n
markings on air intake hoses B and C; then, insert hoses B
and C all the way into air intake hose A.
Insert air intake hoses B and C all the way up to the roots on
the turbocharger end.
2. INSTALLATION OF AIR HOSE ,A
Connect the air hoses ensuring that alignment marks are
aligned with projections.
Insert air hoses B and C into pipe all the way to its step.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the intercooler itself.