Mitsubishi Stealth 1994 Import Service Manual page 1220

24-28
HEATERS AND MANUAL AIR CONDITIONING
DISASSEMBLY AND REASSEMBLY
Compressor oil: SUN PAG 56
Disassembly steps
1. Clips
2. Evaporater case (upper)
3. Fin therm0 sensor
4. Air inlet sensor
5. Evaporator case (lower)
6. Evaporator assembly
7. Grommet
8. Insulator
9. Rubber insulator
SERVICE POINTS OF DlSAsSEMBLY
1. REMOVAL OF CLIPS
Remove the clips with a screwdriver covered with a shop
towel to prevent damage to case surfaces.
11. REMOVAL OF EXPANSION VALVE
Loosen the flare nut by using two wrenches (for both the
inlet and outlet).
7 8