Mitsubishi Stealth 1994 Import Service Manual page 563

MULTIPORT FUEL INJECTION -
INSPECTION
Using Scan Tool
Item No. Data display
43
HARNESS lNSPEC+lON
1
connector
I
Check condition
Sensor
Engine: Warmed up
temperature Engine is maintained in
a constant state for
2 minutes or more
Disconnect vacuum hose
(green stripe) from EGR
solenoid and install blind
caps to removed vacuum
hose end and solenoid
nipple.
Measure the power supply voltage.
Connector: Disconnected
l
Check for continuity of the ground
circuit.
Connector: Disconnected
l
SENSOR INSPECTION
Refer to GROUP 25 - Exhaust Gas Recirculation (EGR) System.
On-Vehicle Inspection of MFI Components
Engine state
700 rpm (Idle)
3,500 rpm
Voltage (VI
4.3 - 4.7
Standard value
100°C (212°F) or less
120°C (248°F) or more
Repair the
harness.
Repair the
harness.