Mitsubishi Stealth 1994 Import Service Manual page 1231

HEATERS AND MANUAL AIR CONDITIONING -
SERVICE POINTS OF REMOVAL
1. REMOVAL OF HIGH-PRESSURE HOSE /
PRESSURE PIPE
Loosen the flare nut by using two wrenches.
INSPECTION
CHECKING DUAL PRESSURE SWITCH
For information concerning the checking procedures of the dual
pressure switch, refer to "Service Adjustment Procedures" on
SERVICE POINTS OF INSTALLATION
9. INSTALLATION OF RECEIVER / 7, 6. LOW-PRESSURE
HOSE
If the low-pressure hose is replaced with new one, or if a
new receiver is installed, pour the specified amount of oil in
the compressor before installing these parts in the vehicle.
Compressor oil: SUN PAG 56
Quantity:
Low-pressure hose: 10 cm3 (.3 fl.oz.1
4. INSTALLATION OF LIQUID PIPE B
Connect liquid pipe B first on the receiver side.
24-39
Refrigerant Line