Mitsubishi Stealth 1994 Import Service Manual page 1177

Caution
SRS diagnosis unit. If faulty, replace it.
2. Do not drop or subject the SRS diagnosis
unit to impact or vibration.
If dents, cracking, deformation, or rust are
discovered on the SRS diagnosis unit, re-
place it with a new SRS diagnosis
one.
Discard the old
REMOVAL AND INSTALLATION
Removal steps
l *
Post-installation inspection
Connection for the negative (-)
battery cable.
2. Cup holder
3. Console plug
4. Rear console assembly
l
+ 5. SRS diagnosis unit and each
harness connector connection
SRS diagnosis unit (SDU)
l 4
Preinstallation inspection
SRS - SRS Diaanosis Unit (SDU)
3.
4.
unit.
4
Unused terminals
Z-pin red connector
to clock spring
After deployment of the air bags, replace the
SRS diagnosis unit with a new one.
Never use an ohmmeter on or near the SRS
diagnosis unit, and use only the special test
equipment described on P.23B-16.
6
connector