CRUISE CONTROL SYSTEM - Troubleshootina
(2) Calling up a code
Control switch
SET switch:
ON
(3) Reading a code
switch to ON. In less than 1 .O second thereafter, set the
RESUME switch to ON. Then the input check results
can be displayed.
input check table and read the codes.
NOTE
1. When two or more input operations are performed
simultaneously, all the associated code numbers are
output in ascending order.
2. If no code is output by performing any of the input
operations, the control unit power supply circuit or
SET and RESUME switches are probably defective.
Check the check tables 1 and 2 (P.l4G-7, 8).