Mitsubishi Stealth 1994 Import Service Manual page 881

MANUAL TRANSAXLE <FWD>
3. INSTALLATION OF BEARING SLEEVE
Install the 1st speed gear and bearing sleeve together over
the intermediate gear using the special tool.
2. INSTALLATION OF TAPER ROLLER BEARING
Install the taper roller bearing over the intermediate using
the special tool.
Caution
When installing the bearing, push the inner race only.
1. INSTALLATION OF SNAP RING
Select and install a snap ring that will result in an
intermediate gear bearing end play that is the standard
value.
Standard value: 0.01 - 0.14 mm (.0004 - .006 in.)
21-41