Mitsubishi Stealth 1994 Import Service Manual page 657

HARNESS INSPECTION
connector
Harness side
connector
SENSOR INSPECTION
Refer to P.l4A-135.
INSTALLATION
Measure the power supply voltage of
the heated oxygen sensor.
Connector: Disconnected
l
Ignition switch: ON
l
Check for an open-circuit, or a short-
circuit to ground, between the engine
control module and the heated ox-
ygen sensor.
I
l n e a r e a o x y g e n s e n s o r c o n n e c t o r : \ / 1 -
I /---P
Disconnected
Engine control mod
l
Disconnected
Check for an open-circuit, or a short-
circuit to ground, between the engine
control module and the heated ox-
ygen sensor.
Heated oxygen sensor connector:
l
Disconnected
Engine control module connector:
l
Disconnected
Check for continuity of the ground
circuit.
Connector: Disconnected
l
On-Vehicle Inspection of MFI Components
Repair the
harness.
MFI relay)
Repair the
harness.
Repair the
harness.
I
Repair the
harness.
8