Mitsubishi Stealth 1994 Import Service Manual page 888

21-48
MANUAL TRANSAXLE <FWD>
Needle bearing ' '
SERVICE POINTS OF DISASSEMBLY
6. REMOVAL OF LOCK PIN
Drive out the lock pin from the control finger.
Caution
When removing the lock pin, turn the control lever to d
such position that the lock pin will not contact the
clutch housing.
7. REMOVAL OF SPRING PIN
Drive out the spring pin from the stopper body.
Caution
When removing the spring pin, pull the control shaft in
the direction illustrated so that the spring pin will not
contact the clutch housing.
SERVICE POINTS OF REASSEMBLY
17.16. INSTALLATION OF NEEDLE BEARINGS
Install the needle bearing flush with the surface A of the
clutch housing.
15. INSTALLATION OF OIL SEAL
Install the control shaft oil seal using a socket wrench
7. INSTALLATION OF SPRING PIN / 6. LOCK PIN
Caution
Do not reuse the spring pin and lock pin.
(2) Install the spring pin with its slit at right angle to the
control shaft center.