Mitsubishi Stealth 1994 Import Service Manual page 778

REAR SUSPENSION <AWD>
Service
Adjustment Procedures
SERVICE ADJUSTMENT PROCEDURES
REAR WHEEL ALIGNMENT INSPECTION
CAMBER
Standard value: -0"lO' f 30'
To adjust camber, turn the lower arm mounting bolt on the
crossmember side.
NOTE
Left wheel: Clockwise (0 camber)
Right wheel: Clockwise (0 camber)
The difference between the right and left wheels should be 30'
or less.
One graduation changes camber by about 12'.
TOE-IN
Standard value: 0.5 & 2.5 mm (.Ol * .09 in.)
To adjust toe, turn the trailing arm mounting bolts on the
crossmember side on both sides the same amount.
NOTE
Left wheel: Clockwise (toe-out)
Right wheel: Clockwise (toe-in)
The difference between right and left wheels should be 3 mm
One graduation changes toe by about 2 mm (.08 in.).
Caution
1. Adjust the eccentric cam bolt within 90" from the
central position.
2. Adjust camber and toe, in that order, and, if camber is
adjusted, be sure to adjust toe also.
3. Make the adjustments with the 4WS tie rod end
disconnected from the trailing arm.