Mitsubishi Stealth 1994 Import Service Manual page 1158

CONTINUED FROM PREVIOUS PAGE
MB991 530
SRS Check Harness
heck Harness Connector
Yes
NOTE - IMPORTANT
After repairing the SRS, reconnect the battery cable, erase the diagnostic trouble code memory
(1)
from the scan tool and check the SRS warning light operation to verify the system functions
properly. (Refer to TEST 1.)
(2) SDU = SRS Diagnosis Unit
SRS
(3) Is the resistance between terminal 1 and terminal 21 of
of clock spring
Malfunction of the clock
spring.
Malfunction of thr-
module.
Caution
Never attempt to measure the circuit resistance of the air bag
module (squib) even if you are using the specified tester. If the
circuit resistance is measured with a tester, accidental air bag
deployment will result in serious personal injury.
to SRS Check Harness connector @ and SRS Check
Harness connector 0, respectively.
NOTE
When joining SRS Check Harness connector 0, align its
white paint with the hollow portion of the No. 2
connector of the clock spring.
SRS Check Harness connector 0, and between termin-
al 2 and terminal 22 of SRS Check Harness connector @
normal?
Standard value: less than 0.4 R