Mitsubishi Stealth 1994 Import Service Manual page 736

CRUISE CONTROL SYSTEM
Adjusting nut C
Link B
Throttle
lever \
is blocked by the stopper, turn down adjusting nut C in
the direction that the free travel of the inner cable is
reduced, and back off adjusting nut C the specified
number of turns just before intermediate link C begins ' h .J
to move.
Amount adjusting nut C is to be backed off:
< M / T > About l/2 turn [inner cable free travel
0 - 1 mm (0 - .04 in.)]
< A / T > About two turns [inner cable free
travel 2 to 3 mm (.08 to .12 in.)]
travel of the inner cable of the throttle cable is reduced.
At the position where the lever of intermediate link B is
brought into contact with intermediate link C, back off
adjusting nut B the specified number of turns.
Amount adjusting nut B is to be backed off:
About one turn [inner cable free travel 1 to 2 mm
travel of the inner cable of the cruise control cable is
reduced. At the position where the lever of intermedi-
ate link A is brought into contact with intermediate link
B, back off adjusting nut A the specified number of
turns.
Amount adjusting nut A is to be backed off:
About one turn [inner cable free travel 1 to 2 mm
engine speed adjusting screw is in contact with the
stopper of the throttle lever.
CRUISE CONTROL SYSTEM INSPECTION
CRUISE CONTROL MAIN SWITCH CHECK
(2) Check to be sure that the CRUISE CONTROL ON indicator
light within the combination meter illuminates when the
main switch is switched ON.