Mitsubishi Stealth 1994 Import Service Manual page 405

INTAKE AND EXHAUST
SERVICE POINT OF REMOVAL
13. REMOVAL OF ENGINE OIL COOLER
Disconnect the hose from the engine oil cooler and remove
the engine oil cooler only.
INSPECTION
Check the charge air cooler fins for bending, damage, or
l
foreign matter.
Check the charge air cooler hoses for cracking, damage, or
l
wear.
SERVICE POINTS OF INSTALLATION
21. INSTALLATION OF AIR INTAKE HOSE C / 20. AIR
INTAKE HOSE B / 19. AIR INTAKE HOSE A
Engaging the notch with the LI mark at points indicated by
the arrows, insert air intake hoses B and C until seated.
Insert the turbocharger end of air intake hoses B and C
completely.
15. INSTALLATION OF CHARGE AIR COOLER LEFT / 12. AIR
HOSE F / 9. AIR HOSE E / 8. AIR HOSE B / 5. AIR HOSE G
Aligning the marks at the points indicated by the arrows,
insert securely into the stepped portion of the pipe or until
seated.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the charge air cooler itself.
4. INSTALLATION OF CHARGE AIR COOLER RIGHT / 2.
AIR HOSE D / 1. AIR HOSE C
Aligning the marks at the points indicated by arrows, insert
securely into the stepped portion of the pipe.
Caution
Be careful not to allow any foreign matter to get into
the hoses, pipes, or the charge air cooler itself.