Mitsubishi Stealth 1994 Import Service Manual page 893

MANUAL TRANSAXLE <AWD> - Service Adjustment Procedures 21-53
For L.H.
Dust seal _
I
R . H . sidew -'
DRIVE SHAFT OIL SEALS REPLACEMENT
(Refer to GROUP 2A - Drive Shaft.)
(2) Remove the transfer assembly.
(3) Using a flat-tip (-) screwdriver, remove the oil seal.
(4) Install the oil seals using the following procedure:
For R.H.
Using the special tool, tap the oil seal into the transaxle.
Note that there are two types of oil seals, one for R.H. and
the other for L.H., and the shape of each type is different,
as shown.
Drive shaft oil seal must be installed in the direction shown.
(5) Apply a coating of the transmission oil to the lip of the oil
seal.
Transmission oil: MOPAR Hypoid gear oil or equivalent,
2200037
API classification GL-4, SAE 75W-90
or 75W-85W