Mitsubishi Stealth 1994 Import Service Manual page 962

AUTOMATIC TRANSAXLE
REMOVAL AND INSTALLATION
<Vehicles without oil cooler>
1. Hose
2. Tube assembly
Feed hose
3.
4. Return hose
Hose assembly removal steps
5. Connection of volume air flow sensor con-
6. Air cleaner cover, Air intake hose
7. Hose assembly
Tube assembly removal steps
8. Front sDlash shield extension
(right side)
* w 9. Eye bolt
l
Transaxle oil cooler removal steps
8. Front splash shield extension
(right side)
11. Transaxle oil cooler
<Vehicles with oil cooler>
5.0 Nm
4.0 ft.lbs.
Pre-removal and Post-installation
Operation
Drainage and Filling of Automatic
l
Transaxle Fluid (Refer to GROUP 0
-Maintenance Service.)
. Removal and Installation of
Front Under Cover (Refer to
GROUP 23A- Front Bumper.)
12Nm
8 ft.lbs.
8