Mitsubishi Stealth 1994 Import Service Manual page 964

21-124
AUTOMATIC TRANSAXLE
TRANSAXLE ASSEMBLY
REMOVAL AND INSTALLATION
Pre-removal Operation
Place Selector Lever in "N" Position
l
and Stop the Engine.
Draining of Transaxle Fluid
l
(Refer to GROUP 0- Maintenance
Service.)
Removal of Front Under Cover
l
(Refer to GROUP 23A- Front Bumper.)
Removal steps
1. Side under cover
2. Battery
3. Battery seat, Washer tank
4. Volume air flow sensor connector
5. Ai&eaner cover, Air intake
6. Clip
l + 7. Connection for transaxle control
cable
8. Connection for oil cooler hose
9. Park/neutral position switch connector
pulse generator connector and
oil temperature sensor connector
12. Connection for transaxle ground cable
13. Connection for speedometer connector
14. Connection for transaxle mount bracket
l *
70 Nm
51 ftlbs.
70 Nm
51 ft.lbs.
-14
12