Mitsubishi Stealth 1994 Import Service Manual page 253

BRAKES
SERVICE POINTS OF REMOVAL
Expand the shoe & lining assembly and remove the shoe
hold down cup.
SERVICE POINTS OF INSTALLATION
13. INSTALLATION OF SHOE TO ANCHOR SPRINGS
The shoe-to-anchor spring must be installed in the sequ-
ence shown in the illustration.
Caution
Each shoe-to-anchor spring has a unique spring load
and the spring "a" is painted to prevent erroneous
installation.
NOTE
The figure shows the left wheel; for the right wheel, the
position in symmetrical.
12. INSTALLATION OF ADJUSTER
Install the adjuster facing the left adjusting bolt to the
vehicle front and right adjusting bolt to the vehicle rear.
5-97