Easy Operation Mode Setting (Easy Setting Mode) - Mitsubishi Electric FR-F800 Instruction Manual

4.3
Easy operation mode setting (easy setting
mode)
A required combination of a start command and a frequency command can be easily selected using Pr.79 Operation
mode selection.
Changing example
Operate with the external (STF/STR) start command and
Press and
1.
Flickering
Turn until
table below.)
2.
Flickering
3.
Press to enter the setting. External/PU combined operation mode 1 (Pr.79="3") is set.
Operation panel indication
Flickering
Flickering
Flickering
Flickering

To use as a potentiometer, refer to

Easy operation mode setting (easy setting mode)

Operation
for 0.5 s.
(External/PU combined operation mode 1) appears. (For other settings, refer to the
Operation method
Start command
,
External
(STF, STR)
External
(STF, STR)
,
page 166.
frequency command.
Operation mode
Frequency command
PU operation mode

Analog
External operation mode
voltage input
External/PU combined

operation mode 1
Analog External/PU combined
voltage input operation mode 2
BASIC OPERATION
4
93