Selecting The Pm Motor Control By Performing Parameter Initialization On The Operation Panel - Mitsubishi Electric FR-F800 Instruction Manual

5.2.3
Selecting the PM motor control
Selecting the PM motor control by performing parameter initialization on
the operation panel (
POINT POINT
• The parameters required to drive an IPM motor MM-EFS or MM-THE4 are automatically changed as a batch. (Refer to
151.)
• [PM] on the operation panel (FR-DU08) is on when the PM motor control is set.
Initialize the parameter settings for an IPM motor MM-EFS or MM-THE4 by selecting IPM
Operation example
parameter initialization on the operation panel.
Screen at power-ON
1.
The monitor display appears.
Changing the operation mode
2.
Press to choose the PU operation mode.
[PU] indicator is on.
Parameter setting mode
3.
Press to choose the parameter setting mode.
[PRM] indicator is on.
IPM parameter initialization
4.
Turn until
Setting value display
5.
Press to read the present set value.
" " (initial value) appears.
Changing the setting value
6. Turn to change the set value to "
" " and "
Setting
0 Parameter settings for an induction motor
12 Parameter settings for an IPM motor MM-EFS/MM-THE4 (rotations per minute)
NOTE
• If parameters are initialized for a PM motor in the IPM initialization mode, the Pr.998 PM parameter initialization setting is
automatically changed.
• To set a speed or to display monitored items in frequency, Pr.998. (Refer to
)
(IPM parameter initialization) appears.
", then press
" flicker alternately. The setting is completed.
Description
Operation
.
page 150.)
Control method
PM PM PM
PARAMETERS
page
5
149