Remote Setting Function - Mitsubishi Electric FR-F800 Instruction Manual

(F) Setting of acceleration/deceleration time and acceleration/deceleration pattern
5.5.3

Remote setting function

Even if the operation panel is located away from the enclosure, contact signals can be used to perform continuous
variable-speed operation, without using analog signals.
By simply setting this parameter, the acceleration, deceleration and setting clear functions of the remote speed setter
(FR-FK) become available.
Pr. Name
59
Restart cushion time
F101
Remote setting function
• Use Pr.59 to enable/disable the remote setting function and enable/disable the frequency setting storage function during
remote setting.
• When Pr. 59"0" (remote setting function valid), the functions of the RH, RM and RL signals are changed to acceleration
(RH), deceleration (RM) and clear (RL).
Inverter
Forward
rotation
STF
Acceleration
RH
Deceleration
RM 10
Clear
RL
2
SD
5
Connection
diagram for remote setting
194
PARAMETERS
Initial Setting
value range
0
1
2
3
0
11
12
13
Set frequency
∗1
0Hz
0
ON
Acceleration (RH)
Deceleration (RM)
Clear (RL)
Forward rotation (STF)
Power supply
∗1 External operation frequency (other than multi-speed) or PU running frequency
Description
Frequency
RH, RM, RL
signal function
storage function
Multi-speed setting -
Remote setting With
Remote setting Without
Without
(Turning STF/STR
Remote setting
OFF clears remotely-
set frequency.)
Remote setting With
Remote setting Without
Without
(Turning STF/STR
Remote setting
OFF clears remotely-
set frequency.)
When Pr.59 = "1, 2, 11, 12"
ON
ON
ON
ON
ON
Deceleration to
the frequency
setting
lower than the set
frequency
Disabled
Enabled
When Pr.59 = "1, 11"
When Pr.59 = "3, 13"
When Pr.59 = "2, 3, 12, 13"
ON
ON
ON ON
Time
ON