Mitsubishi Electric FR-F800 Instruction Manual page 217

(D) Operation command and frequency command
Pr.338 Communication
Operation
operation command source
location
Pr.339 Communication speed
selection
command source
50 SQ Sequence start
51 X51 Fault clear
60 STF Forward rotation command
61 STR Reverse rotation command
62 RES Inverter reset
PID forward/reverse action
64 X64
switchover
65 X65 PU/NET operation switchover
External/NET operation
66 X66
switchover
67 X67 Command source switchover
DC feeding operation
70 X70
permission
71 X71 DC feeding cancel
72 X72 PID integral value reset
Second PID P control
73 X73
switchover
77 X77 Pre-charge end command
Second pre-charge end
78 X78
command
Second PID forward/reverse
79 X79
action switchover
Second PID control valid
80 X80
terminal
PID gain tuning start/forced
81 PGT
end
Emergency drive execution
84 X84
command
Control signal input for main
94 X94
circuit power supply MC
95 X95 Converter unit fault input
Converter unit fault input
96 X96
(E.CPU, E.OUT)
97 X97 Cleaning valid
98 X98 Cleaning trigger
[Explanation of terms in table]
External (EXT) : Commands from external terminal are only valid.
NET : Commands via communication are only valid.
Combined : Command from both external terminal and communication is valid.
― : Command from either of external terminal and communication is invalid.
Compensation : Commands are valid only from external terminal signals when Pr.28 Multi-speed input compensation
selection ="1".
NOTE
• The command source of communication follows the Pr.550 and Pr.551 settings.
• The Pr.338 and Pr.339 settings can be changed while the inverter is running when Pr.77 = "2". Note that the setting change
is applied after the inverter has stopped. Until the inverter has stopped, communication operation command source and
communication speed command source before the setting change are valid.
216
PARAMETERS
0: NET
0: 2:
1: EXT
NET EXT
External, NET
Combined
NET
NET
External
NET External
External
External
External
NET
NET
NET External
NET External
NET External
NET External
NET External
NET External
NET External
Combined
External
External
External
NET
NET
1: EXT
0: 1: 2:
NET EXT EXT
Pr.414="1": Valid
when there is external
External
or network input
Pr.414="2": External
External
External
External
NET External
External
External
NET External
NET External
NET External
NET External
NET External
NET External
NET External
External
External
REMARKS