Registering A Parameter In A User Group (Pr.173); Clearing A Parameter From A User Group (Pr.174) - Mitsubishi Electric FR-F800 Instruction Manual

(E) Environment setting parameters
Registering a parameter in a user group (Pr.173)
• To register Pr.3 in a user group
Power ON
1.
Make sure the motor is stopped.
Changing the operation mode
2.
Press to choose the PU operation mode. [PU] indicator is on.
Parameter setting mode
3.
Press to select the parameter setting mode. (The parameter number read previously appears.)
Selecting the parameter number
4.
Turn until
Selecting the parameter number
5.
Press to display "
Parameter registration
6.
Turn until
To continue adding parameters, repeat steps 5 and 6.
Clearing a parameter from a user group (Pr.174)
• To delete Pr.3 from a user group
Power ON
1.
Make sure the motor is stopped.
Changing the operation mode
2.
Press to choose the PU operation mode. [PU] indicator is on.
Parameter setting mode
3.
Press to select the parameter setting mode. (The parameter number read previously appears.)
Selecting the parameter number
4.
Turn until
Selecting the parameter number
5.
Press to display "
Clearing the parameter
6.
Turn until
To continue deleting parameters, repeat steps 5 and 6.
NOTE
• Pr.77 Parameter write selection, Pr.160, Pr.296 Password lock level, Pr.297 Password lock/unlock and Pr.991 PU
contrast adjustment can always be read regardless of the user group setting. (For Pr.991, only when the FR-LU08 or the
FR-PU07 is connected.)
• Pr.77, Pr.160, Pr.172 to Pr.174, Pr.296, Pr.297 cannot be registered in a user group.
• When Pr.174 is read, "9999" is always displayed. "9999" can be written, but it does not function.
• Pr.172 is disabled if set to a value other than "9999".
Parameters referred to ???????
Pr.15 Jog frequency, Pr.16 Jog acceleration/deceleration time
Pr.77 Parameter write selection
Pr.296 Password lock level, Pr.297 Password lock/unlock
Pr.550 NET mode operation command source selection
Pr.551 PU mode operation command source selection
Pr.991 PU contrast adjustment
178
PARAMETERS
(Pr.173) appears.
".
(Pr.3) appears. Press
(Pr.174) appears.
".
(Pr.3) appears. Press
page 221
page 169
page 171
page 210
page 210
page 165
Operation
to register the parameter.
Operation
to delete the parameter.
and flicker alternately.
and flicker alternately.