4.3
Easy setting of the inverter operation mode
The operation mode suitable for start and speed command combinations can be set easily using Pr.79 Operation mode
selection.
The following shows the procedure to operate with the external start command (STF/STR) and the frequency command by
using
.
Operating procedure
1.
Press
Blinking
2.
Turn
following table.)
Blinking
3.
Press
Operation panel indication
Blinking
Blinking
Blinking
Blinking
*1
To use the setting dial as a potentiometer, refer to
118
4. BASIC OPERATION
4.3 Easy setting of the inverter operation mode
Downloaded from
ManualsNet.com
and
for 0.5 second.
until "
" (External/PU combined operation mode 1) appears. (For other settings, refer to the
to confirm the selection. External/PU combined operation mode 1 (Pr.79 = "3") is set.
Operation method
Start command
,
External (STF,
STR)
External (STF,
STR)
,
search engine
Frequency
command
PU operation mode
*1
Analog voltage
External operation mode
input
External/PU combined operation mode 1
*1
Analog voltage
External/PU combined operation mode 2
input
page
202.
Operation mode