Mitsubishi Electric FR-F800 Instruction Manual page 478

Pr. Register
C40 (933) 41933 Terminal 4 gain command (torque)
42123 Terminal 4 gain (torque)
C41 (933)
Terminal 4 gain (torque)
43933
(terminal analog value)
C42 (934) 41934 PID display bias coefficient
42124 PID display bias analog value
C43 (934)
PID display bias analog value
43934
(terminal analog value)
C44 (935) 41935 PID display gain coefficient
42125 PID display gain analog value
C45 (935)
PID display gain analog value
43935
(terminal analog value)
1000 to 45000 to For details on parameter names, refer
1999 45999 to the parameter list
• Faults history
Register Definition
40501 Faults history 1
40502 Faults history 2
40503 Faults history 3
40504 Faults history 4
40505 Faults history 5
40506 Faults history 6
40507 Faults history 7
40508 Faults history 8
• Model information monitor
Register
44001 Model (First and second characters)
44002 Model (Third and fourth characters)
44003 Model (Fifth and sixth characters)
44004 Model (Seventh and eighth characters)
44005 Model (Ninth and tenth characters)
44006 Model (Eleventh and twelfth characters)
44007 Model (Thirteenth and fourteenth characters)
44008 Model (Fifteenth and sixteenth characters)
44009 Model (Seventeenth and eighteenth characters)
44010 Model (Nineteenth and twentieth characters)
44011 Capacity (First and second characters)
44012 Capacity (Third and fourth characters)
44013 Capacity (Fifth and sixth characters)
NOTE
• When a 32-bit parameter setting or monitored value is read and the read value exceeds HFFFF, the reply data will be HFFFF.
Name
(page 112).
Read/Write
Read/Write
Read
Read
Read
Read
Read
Read
Read
Definition
(N) Operation via communication and its settings
Read/
Write
Read/
Write
Read/
Analog value (%) set to C41 (933)
Write
Read Analog value (%) of current (voltage) applied to terminal 4
Read/
Write
Read/
Analog value (%) set to C43 (934)
Write
Read Analog value (%) of current (voltage) applied to terminal 4
Read/
Write
Read/
Analog value (%) set to C45 (935)
Write
Read Analog value (%) of current (voltage) applied to terminal 4
Read/
The parameter number + 44000 is the register number.
Write
Remarks
Data is 2 bytes and so is stored in "H00".
The lowest 1 byte can be referred to for the error code.
(For details on error codes, refer to
The faults history is batch-cleared by writing to register
40501.
Set any value for the data.
Read/Write
Read
Read
Read
Reading inverter type in ASCII code.
Read
"H20" (blank code) is set for blank area.
Read
Example of FR-F840-1 (FM type)
Read
H46, H52, H2D, H46, H38, H34, H30,
Read
H2D, H31, H20......H20
Read
Read
Read
Reading inverter capacity in ASCII code.
Read
Data is read in increments of 0.1 kW, and
rounds down to 0.01 kW increments.
Read "H20" (blank code) is set for blank area.
Example
0.75K ........."7"
Read
(H20, H20, H20, H20, H20, H37)
Remarks
page 533.)
Remarks
PARAMETERS
5
GROUP
N
477