Basic Operation Of The Operation Panel - Mitsubishi Electric FR-F800 Instruction Manual

4.1.2

Basic operation of the operation panel

Basic operation
Operation mode switchover/Frequency setting
External operation mode
Parameter setting mode (At power-ON)
Parameter setting mode
∗5
Parameter clear
Group parameter setting
Function mode
Long press

For the details of operation modes, refer to

Monitored items can be changed.(Refer to

For the details of the trace function, refer to

For the details of faults history, refer to

The USB memory mode will appear if a USB memory device is connected. (Refer to
∗1(
At power-ON)
PU operation mode
Value change
Output current monitor
∗2
Value change
All parameter clear
Automatic parameter setting
(Example)
Flickering
Faults history 1
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
page 200.
page 263.)
page 433. For the details of the PID gain tuning, refer to
page 535.
∗1
∗2
Faults history clear
IPM parameter initialization
Trace function ∗3
(Example)
Flickering
∗4 Faults history 2
is displayed.
page 61.)
Operation panel (FR-DU08)
∗1
PU Jog operation mode
Flicker
(Example)
Frequency setting has been
written and completed!!
Output voltage monitor ∗2
Display the present
setting
Flicker
(Example)
Parameter write is completed!!
Parameter copy
Initial value change list
PID gain tuning ∗3
(Example)
Flickering
∗4 Faults history 8 ∗4
page 394.
BASIC OPERATION
4
89