(D) Operation Command And Frequency Command - Mitsubishi Electric FR-F800 Instruction Manual

5.6
(D) Operation command and frequency
command
Purpose
To select the operation mode
To start up in Network operation
mode at power-ON
To select the command source
during communication operation
To prevent motor from rotating
reversely
To set the frequency by pulse
train input
To perform JOG operation
To control frequency with
combinations of terminals

(D) Operation command and frequency command

Parameter to set
Operation mode selection
Communication startup
mode selection
Operation and speed
command sources during
communication operation,
command source selection
Reverse rotation prevention
selection
Pulse train input
JOG operation
Multi-speed operation
P.D000 Pr.79
P.D000, P.D001 Pr.79, Pr.340
Pr.338, Pr.339,
P.D010 to P.D013
Pr.550, Pr.551
P.D020 Pr.78
P.D100, P.D101, Pr.291,
P.D110, P.D111 Pr.384 to Pr.386
P.D200, P.F002 Pr.15, Pr.16
Pr.28,
Pr.4 to Pr.6,
P.D300 to P.D315
Pr.24 to Pr.27,
Pr.232 to Pr.239
PARAMETERS
Refer to
page
200
209
210
217
218
221
222
5
GROUP
D
199