Easy Operation Mode Setting (Easy Setting Mode) - Mitsubishi Electric FR-D720-070 Instruction Manual

Operation panel
4.1.3

Easy operation mode setting (easy setting mode)

Setting of Pr. 79 Operation mode selection according to combination of the start command and speed command can be
easily made.
Changing
Start command: external (STF/STR), frequency command: operate with
example
Operation
1.
Screen at powering on
The monitor display appears.
2.
Press and for 0.5s.
3.
Turn until appears.
(refer to the table below for other settings)
Operation Panel Indication
Flickering
Flickering
4.
Press to set.
REMARKS
is displayed ... Why?
Parameter write is disabled with "1" set in Pr. 77.
is displayed ... Why?
Setting can not be made during operation. Turn the start switch (
Press before pressing
operation mode when performed in the PU operation mode (PU JOG operation mode) and to PU operation mode when
performed in the external operation mode.
Reset can be made with .
The priorities of the frequency commands when Pr. 79 = "3" are "Multi-speed operation (RL/RM/RH/REX) > PID control (X14) >
terminal 4 analog input (AU) > digital input from the operation panel".
54
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Operation Method
Start command Frequency command
Flickering
Flickering
External Analog
(STF, STR) voltage input
Flickering
Flickering
External
(STF, STR)
Flickering
Flickering
Analog
voltage input
Flicker ··· Parameter setting complete!!
The monitor display appears after 3s.
, STF or STR) off.
to return to the monitor display without setting. In this case, the mode changes to external
Display
Flickering
Flickering
Flickering