Copying Parameter Settings Read To The Operation Panel To The Inverter - Mitsubishi Electric FR-F800 Instruction Manual

Hide thumbs Also See for FR-F800:
Table of Contents

Advertisement

Copying and verifying parameters on the operation panel
Copying parameter settings read to the operation panel to the inverter
1.
Connect the operation panel to the destination inverter.
Parameter setting mode
2.
Press
to choose the parameter setting mode. (The parameter number read previously appears.)
Selecting the parameter number
3.
Turn
to
"
" appears.
Selecting parameter copy
4.
Turn
to change the setting value to "
appears.
Copying to the inverter
Press
to start copying to the inverter. (It takes about 60 seconds to copy all the settings. During copying, the selected
5.
parameter group flickers.)
Perform this step while the inverter is stopped. (Parameter settings cannot be copied during operation.)
Ending copying
6.
"
" and "
When parameters are written to the destination inverter, reset the inverter before operation by, for example, turning the power
7.
supply OFF.
NOTE
appears... Why?
- Parameter write error. Perform the operation from step 3 again.
and
- Appears when parameter copy is performed between inverters FR-F820-02330(55K) or lower or inverters FR-F840-
01160(55K) or lower and inverters FR-F820-03160(75K) or higher or FR-F840-01800(75K) or higher.
- When CP and 0.00 flicker alternately, set the Pr.989 Parameter copy alarm release as shown below (initial value).
Pr.989 setting
10
100
- After setting Pr.989, perform setting of Pr.9, Pr.30, Pr.51, Pr.56, Pr.57, Pr.72, Pr.80, Pr.82, Pr.90 to Pr.94, Pr.453, Pr.455,
Pr.458 to Pr.462, Pr.557, Pr.859, Pr.860, and Pr.893 again.
522
PARAMETERS
(parameter copy), and press
" and press
" flicker alternately after copying ends.
are displayed alternately.
Cancels the alarm of FR-F820-02330(55K) or lower and FR-F840-01160(55K) or lower.
Cancels the alarm of FR-F820-03160(75K) or higher and FR-F840-01800(75K) or higher.
Operation
.
.
Operation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents